April 8, 2014 - Local Marcellus Drilling Relies on Regional Manufacturing for Steel Pipe
Written by Vince Delbrugge, Manager, Unconventional Drilling Operations
On April 8th, I was one of five ABARTA Energy employees that toured three local factories owned by TMK IPSCO that make the steel tubular products that we use to drill and complete our wells. Manufacturing processes used to make the pipe include those that are icons for Pittsburgh and the Ohio Valley: melting, casting, forming, and cutting of steel. Dan Allen and Doug Dye, representing Miller Supply, and Tony Cargo, representing TMK IPSCO, hosted the tour. After meeting in Robinson Township for breakfast, we drove to the three different facilities in Ambridge and Koppel, Pennsylvania and Brookfield, Ohio (see map below highlighting locations) to watch production and learn how their operation influences ours. I describe some of the interesting processes in my article.
The Koppel facility is modified to melt and cast the types of steel used for our applications. Electric arc furnaces use huge amounts of electricity to melt steel scrap which is the first operation of manufacturing tubing and pipe. Melting in an arc furnace is a spectacular event. Like lightning in a big bucket, thousands of Amperes of electric current spark between graphite electrodes and the steel. Both electric current and radiating light easily add enough heat to reach the steel melting temperature of nearly 3,000 ˚F. Sophisticated technology is used to measure and modify the amount of elements in the molten steel before they are cast into the solid, cylinder-shaped, billets. Small, precise, amounts of carbon, manganese, chrome, molybdenum, and other elements are specified and controlled in the molten metal that is about 97% iron. Scrap metal for melting is limited to certain steels, because some elements cannot be removed or reduced once they are melted.
Billets cool and solidify in the Koppel factory with the shape, properties and element composition that all influence quality of the finished pipe. After cooling to room temperature, the billets are transported by truck to the factory in Ambridge where we watched them form the solid billets into the sizes and shapes for our oil and gas applications. The metal is stretched, bent, twisted, and squeezed using a variety of traditional cold and hot processes that are performed at different temperatures ranging up to 2,300 ˚F. The first forming process at Ambridge is rotary piercing which creates the hole in the pipe that is called the inner diameter. This interesting process is illustrated below in details (a) through (d). Details (e) and (f) are sections of billets that were photographed after interrupting the rotary piercing process and cutting the billets that show the growth of the inner diameter. Subsequent forming processes at Ambridge refine the diameters, roundness, and straightness of the tubular material that we need for our oil and gas operations. Heating and cooling processes called quench and temper change the atomic structure of the steel to increase its strength.
Size and shape of the pipe and tubing is complete when it leaves Ambridge, but it cannot be used yet for oil and gas operations. Almost all of our tubular products are connected together with screw threads, which are cut into the ends of the products at the Brookfield, Ohio facility. We had the opportunity to watch an Okuma lathe cut threads into the outer diameter of pipe used for our production casing, which is the pipe that extends from the surface to the bottom of the well. Okuma lathes and many other machine tools can maintain tolerances of 1/10,000 of an inch, which is more precise than is required for successful pipe connections. Roundness, straightness, and other shape tolerances of pipe products and other structural materials created during forming are the most important factors that determine our pipe connection quality, and we saw the extensive inspection operations at Brookfield diligently monitoring those properties both before and after cutting the threads. Some of the pipe from Ambridge must be rejected at Brookfield because the threads cannot be successfully cut due to the shape distortion.
Working with suppliers gives us knowledge about their capabilities that will help our planning for our wells. Visiting the different facilities gave us the chance to observe processes that are critical in the path of manufacturing our casing, tubing and drill pipe, and we know how to evaluate the important characteristics and improve the quality of our wells. We are grateful to TMK IPSCO for the opportunity to tour their facilities and purchase material for our wells that is made here in our region.
 Image from Google Earth.
 Image by Anthony Cargo.
 Mr. Blaaaaah. An Electric Arc Furnace’s Three Graphite Electrodes. Web. http://www.reddit.com/domain/siemens.com/.
 Web. http:/www.alibaba.com/product-detail/TIEQI-High-Performance-flexible-dummy-bar_56…
 Schematic of the rotary piercing operation. Web. http://en.wikipedia.org/wiki/File:Schraegwalzen.png. Modified by Vince Delbrugge.
 E. Ceretti, E.; Giardini, C.; Attanasio, A.; Brisotto, F.; and Capoferri, G. Figure 6. Longitudinal section of the rod, start and development of the hole, in FEM Analysis of Rotary Tube Piercing Process. Web. http://www.tubenet.org.uk/technical/piercing.html. Modified by Vince Delbrugge.
 E. Ceretti, E.; Giardini, C.; Attanasio, A.; Brisotto, F.; and Capoferri, G. Figure 7. Α 3˚, Formation of the internal hole in the rolling direction: =Comparison between simulation and experiment, in FEM Analysis of Rotary Tube Piercing Process. Web. http://www.tubenet.org.uk/technical/piercing.html. Modified by Vince Delbrugge.
 Industrial Piping Specialists, Incorporated. Web. http://www.ipipes.com/?page_id=144.
 Okuma. Web. http://www.okuma.com/loc-series-oil-country-lathe.